L.V. SWITCHBOARD SYSTEM
1.Design and cost estmates
Switchboard design and costing are fully computerized,
our state of the art CAD/CAM station with its integrated costing
software gives us the ability to undertake a project to from
the initial design stage, and produce generated cost estimate
at the same.
2.Swift design and accurate cost estimate
Swift design and accurate cost astimates
where others promise, we deliver. We have
the edge where design, chages or modification
are required, as we can produce alternative
designs quickly, without the lengthy cist reestimation.
Customers can reset assured that our estimates
are accurate and reasonable for thir project.
3.Switchboard System
The switchboard is of self contain floor mounted modulea connection.
The feature KNOCK DOWN construction consist of different moduled.
The system can be delivered in kit from ready for assembly,
thes minimizing handling and accessibility problems.
4.Structure and Components of Switchboard
Our Switchboards are constructed of cold rolled
sheet steel,with 2.0 mm. finished with epoxy power painted
for protection against corrosion.
1.INDOOR WALL MOUNTED TYPE SWITCHBOARD
Enclosure and Door
Enclosre and door are made from sheet steel 1.6 mm thick.
The sheet steel pass the pretreatment process and finished
with epoxy power paint.
Mounting plate
Mounting plate is made from sheet steel 1.6 mm think.
The sheet steel pass the pretreatment process andfinished
with epoxy power paaint. The mounting plate is also provided
pre-drilled holes for mounting device easily.
Standard Dimensions
| width | 300, 400, 500, 600, 700, and 800 mm. |
| Height | 400, 500, 600, 700, 800, 900, 1000, 1100 and 1200 mm. |
| Depth | 200, 250, and 300 mm. |
2.OUTDOOR WALL MOUNTED TYPE SWITCHBOARD
Enclosure and Door
Enclosre and door are made from sheet steel 1.6 mm thick.
The sheet steel pass the pretreatment process and finished
with epoxy power paint.
Mounting plate
Mounting plate is made from sheet steel 1.6 mm think.
The sheet steel pass the pretreatment process andfinished
with epoxy power paaint. The mounting plate is also provided
pre-drilled holes for mounting device easily.
Mounting plate
1. Enclosure is made form a single sheet and all around
protective channel formed.
2. Door with is round rubber seal preventing moiture from
outside.
3. Cable entry openings sealed with gland plate.
4. Grounding facilitiec are provided on enclosure body,
and mounting plate
3.OUTDOOR FLOOR STANTING TYPE SWITCHBOARD
Standard dimensssions ( IP 55)
1. Wall mounted type.
Same as indoor wall mounted type switchboard.
2. Floor standing type.
Electrical part accessories
1. Copper Busbar Ampacity